Showing 1–20 of 27 results
Air Filter for Inert Gas Sample to analyser
Inert Gas Generator part
This is the air filter for inert gas before the analyser, filter cartridges can be replaced inside.
Air Filter Cartridge for Inert Gas Sample to Analyser
These filter cartridges are replaceable and are used to filter out remaining contaminants in the inert gas sample before the analyser.
Bubbler unit for cleaning of sample gas.
For: Hamworthy Inert Gas Generator, O2 Analyser for brands including Servomex 790, Servomex 1800, Hitech, SBS Oxygen analyser calibration panels.
Filter elements in sets of five for O2 Anaylsers for MOSS and Kangrim Inert Gas Systems using the SBS and GI O2 anaylsers.
O2 Sensor Unit Insulation Cup for O2 Analyser sensor 790 series Servomex
| Product | Our Code |
| O2 Sensor Unit Insulation cup (pair) | AN17N |
| O2 Sensor Unit Insulation cup OEM (pair) | AN18N |
Sensor Complete with O-Ring/disc
Zirconia O2 sensor.
Servomex Interconnecting P.C.B 00715907
For Servomex O2 Anaylser 790
Used onboard Hamworthy Moss IGG Systems
Servomex Interconnecting P.C.B 00715907
For Servomex O2 Anaylser 790 series, used with Servomex Zirconia Sensor (our code: AN10N).
Used onboard Hamworthy MOSS Inert Gas Generators/Systems.
The Servomex Zirconia Oxygen OEM kits offer high performance oxygen measurements
Technology used: Oxygen – Servomex’ unique zironia cell, which offers an accurate and fast response measurement in a design that gives an exceptionally long service life.
Base: Other Tubebase in general
Part no. MJ3001
Filament: Solid State
Description: NPN silicon diffusion planar darlington transistor intended as AF power amplifier
Dimensions: 26 x 39 x 9 mm / 1.02 x 1.54 x 0.35 inch (WHD)
Weight: 12g / 0.42 oz
GIA offers two options for implementing the new G36 O2 Analyser into your IG system onboard your vessels. Both options are convenient and can be completed in one day.
Our Code: AN45N
Micro-fuel cell, Class E-2 Oxygen Sensor
Part No.: C57283-E3
Application: Long life cell for use is the Model 3290 (for use in unattended air liquefaction nitrogen skids)
Dwyer Flowmeter, Range: 50-500 cc/min AIR RMA-12-SSV
Features
Specifications
Parker Air Filter & Regulator AFR 420-15 – Complete Set
| P/N | AFR420-15 |
| Nominal Body Size | 1/2” 12.7mm |
| Port Size | Rc1/2 |
| Element | 5 micron |
| Drain | Manual |
| Bowl | Polycarbonate |
| Bowl Guard | With quick release |
| Regulator Type | Bleed |
Working Temperature: 0 – 60 Degreee CWorking Pressure: 7 -120 PSI
AFR420: 116 mL
Visibility: 360 degree visibility of water level
Regulator Adjustment: By non-rising lockable knob
O2 Analyser 100-230VAC
Type G36i for Inert Gas
Part No.: 01241 / Old Part No.: 00728
Bubbler Unit for Gas Sample
Material: Stainless Steel
Dimensions: 23cm height, 6cm diameter
Teledyne Analyser Air Filter Cartridge (AGF-PV-30-F25)
| Type | F25 |
| Filter element | PTFE sintered |
| Material | PTFE |
| Retention Rate | 25um |
| Filter Surface | 60 cm2 |
| Part No. | 4102013 |
| Package | 5 pieces |
Cable Glands M20 Part No.: 01047
The cable glands are used to attach and secure the end of a cable to the equipment.
Filter Cartridge for Pre Filter
Part No: 00980
These filter cartridges are replaceable and are an important pre-filter to remove contaminants from the inert gas sample.
Bubble Glass Tube Part No.: 00379
The glass tube is used to clean the sample gas and acts as an indicator.
Kindly tell us more about your vessel and equipment and type of service and we will respond within 24 hours.