Description:
The reversible damper motors type SQM… are suitable for 2- wire control with controllers or switching units with changeover contact. The gear housing is of die-cast aluminum and painted silver-gray.
The cover is in dark-grey, impact proof plastic. The base is provided with four threaded entries for Pgll cable glands. The control section comprises 2 motor travel limit switches, 5 auxiliary switches. Manually adjustable cams make the operation of the limit and auxiliary switches. Setting scales provided between the cam discs simplify the adjustment. An additional scale at the end of the cam stack serves as position indicator. In addition, the damper motor type SQM50 is provided with a position indicator visible from outside.Used in Kangrim boilers with Oilon burner and Weishaupt burner.
Product Name:
Air Filter Regulator (With auto drainage)
Description:
These series regulators are come with integrated filter and regulator units save space and require less piping with the backflow function it incorporates a mechanism to exhaust the air pressure in the outlet side reliably and quickly.
Using in all kind of positioner inlet regulated supply pressure side to prevent the positioners and other electro pneumatic devices from faster damage cause by the oil contamination in control air.
Description:
Using as automatic drum level controller in Kangrim boilers and most of the other boilers. This is a single loop controller and controlling the feed water valves depends on the setting levels.
Description:
These relays are industrial plug-in relays. These electromechanical power relays are space saving and mainly used for general-purpose applications.
Description:
This electro-pneumatic positioner (R – type) is using for operation of pneumatic rotary valve actuators by means of control system with an analog output signal of 4-20 mA.
Description:
This smart positioner accurately controls actuator movements, according to input signal of 4-20mA, which is being input from the controller. In addition, built-n micro-processing operator optimizes the positioner performance and provides unique function such as Auto calibration and PID control.
Product Name:
F.O Control Valve Positioner (IP-8000)
Description:
This electro-pneumatic positioner is using for operation of pneumatic flow control valve actuators by means of control system with an analog output signal of 4-20 mA.
Product Name:
F.O Control Valve Positioner (YT – 1000)
Description:
This electro-pneumatic positioner (L – type) is using for operation of pneumatic flow control valve actuators by means of control system with an analog output signal of 4-20 mA.
Description: Using in Kangrim boiler system as air / fuel oil controller to control the air and fuel ratio by controlling F.D fan and fuel regulating valve to get the good combustion rate.
These controllers working in three different modes (cascade /auto / manual) and many levels of digital inputs and output controls included for more précised operations.
Product Name:
H.F.O Pre-heater Temperature Controller
Description:
Using in Kangrim boilers as a heater temperature controller. It is controlling the heater by SSR relay drive voltage output from this controller. It is a replacement model for “CAL 8000” which is obsolete model presently.
Description:
These limit switches are high onsite environment proof switches, which is included heat resistance, corrosion proof and water proof.
Used in Kangrim boilers with Volcano burners for fuel shut-off valves, fuel circulating valve, atomizing steam valve and burner door open / close feedback to the system.
Description:
This linkage used in Oilon burners, connecting between servo motor air guide and air inlet damper to adjust the proper air flow ratio for the burner operation.
Description:
This electromechanical pressure switches provide high vibration resistance and switch point precision in combination with an extremely robust and durable design.
Rugged aluminum housing, Protection IP-65 and any mounting position possible.