Showing 61–80 of 140 results
Mobrey Electrosensor Control Unit
The electrosensor control module controls the liquid level at Inert Gas Scrubbber and Deck Water Seal
* Obsolete. Please contact us for new model replacement information
Moss Code No.: M0181-001
| Switching Function | SPCO relay (energised wet) |
| Max. Switched Current | 1A at 30v res. 0.25A at 30v ind. |
| Max. Switched Voltage | 30v |
| Power Supply | 18-30v dc or ac |
| Dry Current Drawn | 10mA nom. |
| Wet Current Drawn | 25mA max |
| Cable Length | 3m : 5 core 7/0.2mm |
| Cable Sheathing | PVC |
| IP Rating of Sensor | IP66/IP68 (3m) |
| Sensor Material | PPS |
| Operating Pressure | 5 bar |
| Operating Temp. | -20 to 70 deg C |
| Ambient Temp. | -20 to 70 deg C |
| Minimum S.G. | 0.50 |
| Max. Viscosity | 5000cSt. At 20 deg C |
| Switching response | 50ms dry-wet 0.5s wet-dry |
| Hysteresis | < 4mm |
| Repeatability | ± 2mm |
| Overall Length | 110mm |
| Length into tank: External mount | 79mm |
| Body Diameter | 22mm |
| Thread Size 003S2 | 1” BSPT |
Type: TD5BC1AAA
Function: Popular choice for high and low level alarm, high temperature application and pump control/ limit dectection duties.
Features:
PN07N
Paper Recorder Chart for Chino ES600 Width: 60mm
PN45N
Paper Fanfold Chart for Chino ES800-02 Width: 60mm
Paper Recorder Pen (Chino ES680-02) 5 pieces per pack
Used on Hamowrthy MOSS IGG and Flue Gas Systems
This is a solenoid valve used to control the air flow to the ignition burner.
| Product | Our Code |
| Parker Lucifer 121 K01 (24V/60Hz) | SOL02N |
| Parker Lucifer E121 K63 (24V/60Hz) 2/2 Way | SOL03N |
| Parker Lucifer 122 K84 | SOL04N |
| Parker Lucifer E321 H25 (24V/60Hz) | SOL05N |
| Parker Lucifer H75 (24V/60Hz, 8W) | SOL06N |
| Parker Lucifer E341B34 (24V/60Hz) | SOL07N |
| Parker Lucifer E133 K1650 | SOL08N |
| Parker Lucifer 341P22, 2995, 481865B2 (24V/60Hz) | SOL09N |
|
Parker Solenoid Valve VE126YT (24VDC) 0-10 Bar |
SOL10N |
|
Parker Solenoid Valve Air Flush of Oil Gun 5/2 Way |
SOL11N |
Parker Lucifer Solenoid Valve Coil only
481865B2 F
Synonym: DZ02B2
Voltage: 24V / 60HZ
Power consumption: 8W
Insulation: F155
Protection: IP65
Parker Lucifer G1/4″, 2/2 way, Normally closed, Pre: 0-43Bar; Vol: 24VDC E121 K65
This is a solenoid valve used to control the gas flow / oil flow.
| Input Signal | 3-15 psi (0.2 – 1.0 bar) standard |
| Supply Media | Compressed air or gas, dry, dust and oil free with 5 filter element to inlet |
| Air Consumption | 0.6 cfm in balanced condition with 60 psi (4bar) supply |
| Environmental Temp. | -20 to 70 degree C |
| Mounting Position | No limitation |
| Air Connections | Supply and output 1/4” BSP, signal 1/8” BSP |
| Diaphragm | Nitrile Rubber |
Serial: 0036545/ 34763
Pneumatic Positioner, Fig 793 with necessary adapter from GIA
SPDT Micro Switch 10A 125/250V AC 3-15 PSI Pn
Common Application
Inert Gas Equipment Man: Moss Rosenberg Verft A/S
We provide reconditioning servicing for this Actuator, onsite and in the factory.
We are also one of the few companies to carry spare parts for the actuator, this include:
Please note that adaptor are not provider by original maker, please state your application
This unit is also commonly used on other inert gas systems/generator brands.
Positioner for EaziCal Valve Positioner Model: EZ-0B201AD0B
Positioner Microswift
Our Code: PN14N
2W 10 Laps Multi-turn wire potentiometer 200ohm potentiometer:
Resistance: 200R /- 5%
LIN /- 0.20%
Laps: 10 turns
All the metal on its surface are oxides, sulfides, adsorbed gases, moisture, or the formation of thin films of organic molecules.
Resistance: 10K ohm
Type: 10 turns
Rated Power: 3w
Resistance Tolerance: /- 5%
LIN: /- 25%
Resistance: 10K ohm
Type: 10 turns
Rated Power: 3w
Resistance Tolerance: /- 5%
LIN: /- 25%
Power Supply Battery (TSXPLP01) for PLC
TADIRAN high energy lithium battery 3.6V 1/2AA
Our Code: PN03N
We are able to supply all units of the PR Boxes needed with programming inside for your inert gas parts needs, both for Moss IGG and others.
| Product | Our Code |
| 2202 R2D R/I Transmitter 24VDC, Lin.R | PN17N |
| 2204 DRD Isolation Amplifer 24VDC | PN19N |
| PR2237 Trip Amplifier 24VDC | PN20N |
| PR2238 Dual Trip Amplifier 24VDC | PN21N |
| 2279 N2D AC/DC Transmitter 24VDC | PN22N |
| 2281 Ramp Generator, 24 VDC In/Out: Programmable | PN23N |
| 2284 — D1 Isolation Amplifer 24VDC | PN24N |
| 2289A Programmable Signal Caculator 24VDC | PN25N |
| PR4116 PR4501 Programmable Universal Trans, Universal Programming & Display Front | PN36N |
PR Module Base Unit
Our Code: MS02N – MS22N
GIA stocks a wide range of presure sensors. Do contact us for more detailed information of our product range.
| Product | Our Code | Moss Code |
| Pressure Gauges 0 to 10 bar, 1 1/2″ DIA, Connection 1/8″ BSP | MS02N | – |
| SMC Pressure Gauge 0 to 10 kgf/cm2, 1 1/2″ DIA, Connection 1/8″ BSP | MS03N | – |
| Pressure Gauge 4″ Dia x 3/8″ NPT Range: 0-60Bar/900psi | MS04N | – |
| Pressure Gauges 0 to 30 psi for I/P Converter Size: 2″ Material: SSC | MS05N | M0122-001 |
| Pressure Gauges 0 to 40 bar, Bottom 1/4″ BSP Con, 2 1/2″ DIA (63mm) | MS06N | M0119-001 |
| Pressure Gauges 0-4 bar/0-60 psi, Bottom 1/4″ BSP Con, 2 1/2″ DIA (63mm) | MS07N | M0117-001 |
| Pressure Gauges -1000 to 3000 mmAG (for -500 to 2500mm W/G) | MS08N | M0120-001 |
| Pressure Gauges 0-30 psi, Bottom 1/4″ BSP Con, 2 1/2″ DIA (63mm) | MS09N | M0122-001 |
| Pressure Gauges 0-30 bar, Bottom 1/4″ BSP Con, 2 1/2″ DIA (63mm) | MS10N | – |
| Norgren Regulator Valve with Pressure Gauge 0-150psi | MS11N | – |
| Pressure Gauges 40 kg/cm2, Bottom 3/8″ BSP Con, 3″ DIA | MS13N | – |
| Pressure Gauges 30 bar/psi, Bottom 1/4″ BSP Con, 2″ DIA | MS14N | – |
| Pressure Gauges, Range: -1 to 1 bar / -0.1 to 0.1 mpa, Combustion Air to Burner | MS20N | M0120-001 |
| Pressure Gauges, Range: 0 to 2 kg / 0 to 30 psi, Size: 1/2″ x 1/8″ BSP | MS21N | M0122-001 |
| Capri Compound Gauge 2-1/2″ Dial x 1/4″ BSP s/steel Casing, Brass Bottom, non-filled, Range: -1 to 1 bar | MS22N | M0120-011 |
| Capri Pressure Gauge, 2-1/2″ Dial x 1/4″ BSP, Brass Btm-Entry, Range: 0-10bar/psi | MS23N | – |
Kindly tell us more about your vessel and equipment and type of service and we will respond within 24 hours.